I have four photos to share. One is of the chess board I made above. The sixty-four squares are made of poplar wood. The dark squares are dipped in a polyurethane coating I had yet to experiment with. It is not translucent in any way, which I was, in a way, hoping it would be, yet it will surely suffice for the dark squares of the board. The light squares are dipped in clear coat poly. The photo is not actually the final product, as I poured two more coats of clear poly on it. The squares were not totally perfect squares, causing the board to have small gaps. I wanted to fill the few gaps so the top surface would be smooth enough to dust with a microfiber cloth and not to be cleaned with a vacuum cleaner.
The base the squares are glued to is made of an inexpensive, thin plywood, yet the surface on the bottom of the board looks very nice, especially for its cost, and was obtained from Home Depot. If you notice the four holes in the corners of the board, they are there for functionality reasons. They look neat, yet I wanted to be able to get the board to a table from a wall and back again in a small amount of time if necessary. I thought the concave curves on the four edges added to the board’s aesthetic value, a sort of alien look, and am glad they came out without much flaw.
It is the first chess board I have made with wooden squares. Not too much of a hassle when compared to other project ideas I have in mind for chess boards. I am happy with the final result, so far. It should be dry within seven days or so, and will be totally dry within forty, in all considered probability.
Though I have a job and attempt to spend time off work reading (about writing and partially for pleasure) and writing and do, I also [at times] work some with wood projects/electronics. Below is an idea I had for someone for Christmas in 2016. Now far enough into 2017 for it to be nowhere near Christmas-time anyway, I still could not get the idea out of my mind, so I went ahead and processed the material. I hope the recipient of the box enjoys it, even if I ‘sort of’ made it to test the dye.The wood is stained with a water-based blue dye obtained from WoodCraft. The wood itself is an inexpensive hobby ‘white-wood’ plywood sold at Walmart for small picture frames and totally useful for most small box projects. In order to get the box looking at least as good as it does, despite the corners having no dove tails, I sanded it and re-coated it more than once. I made sure the corners were rounded, yet I left the lid mostly trapezoidal. The box has eight magnets for the lid to close/open, and I went with two steel wires instead of an actual hobby hinge for functionality reasons.
The lining is an inexpensive fabric I got from Walmart a few years ago for Christmas projects, ect. It is shiny on one side, so I was pleased with being able to use it for the project and think it came out nice enough. I sewed the corners and top of the fabric by hand into seams and used superglue to secure it within the box. I also used superglue for joining the planks of wood together. I have actual wood glue, yet I usually just use superglue. It will dry very quickly and still bonds wood corners with good strength. With wood glue, it is best to clamp pieces together and wait a day or two for the bond to dry. I’m not sure if I would do that, even if I was retired with nothing to do. At all.
The braided wire on the top of the box is a four-braid steel wire idea I chose over a knob, because the little knobs I got for making other boxes had a long screw I was unable to saw in half. I liked the idea and the final looks of the braid, so I was happy with the final result. On top of the dye is clear coat polyurethane to present a gloss finish. I was worried that the poly would turn the dye green, yet it did not, to my joyful surprise. Even if the box carries an amount of character, I was happy with the final result.
Here is a photo of a houseplant I got yesterday.
The last thing I needed was another plant to care for, yet this one caught the passionate side of my eye. After looking up “Celosia” on the web, I read that the leaves can be used for stew. I have four grapefruit trees I grew from seed that are over a year and a half old and are almost four inches tall, now, as I have cared for them, and my other house plants, daily. I also have a purple basil plant (in the old photo I still use for the header of jcm3blog), now about three years old. I am happy with it (the basil plant) and surprised I was able to keep it alive this long. The purple basil has one branch that is totally purple, so I think it is pretty impressive. For about four months, it was almost entirely green. I have a dark chili-pepper plant that makes little lavender flowers. It actually somehow was pollinated and I witnessed the development of small, spherical, red chili peppers that will probably fade to black upon their ripening.
Years ago I attempted to force pollination with pumpkin flowers and it did not work out (as I did not choose to use cubiculum, or bee feet), so I was surprised to see little chili peppers with no attempt in trying to pollinate the flowers. I think the process may have occurred from misting the plants.
This year, for Christmas 2016 visitors, I got an evergreen tree/bush. It is about three feet tall and is living, though I have yet to change its 35 some-odd pound soil mixture. Why would I even possibly need another house plant? Well, this about the best time of the year to get one -between now and about ten weeks from now, I think. This plant (the Celosia) caught my eye, as well as did another dozen, yet I chose it and plan to keep it healthy. It is an impressive plant, as its stem is lucid redish-pink in hue, and its flowers look like feathers. One way or another, I hope you like the photo of the Celosia.
Thank you for reading this post. On a personal note, I have been busy reading yet recently did write a sci-fi story after reading Ben Bova’s book on how to and plan to edit it soon enough. I am still working on my fantasy novel and plan to write some other stories and a sci-fi novelette or two as well, soon enough. Click the diamond below to check out one of the world’s best publications of sci-fi and fantasy. Have a nice day. 🙂
You must be logged in to post a comment.